Install Kali Linux In your " Secure Boot " using VMware

This tutorial will walk you through the difficult process of installing Kali Linux in VMware Player, a free virtual machine manager that can be downloaded from www.vmware.com.

This tutorial assumes that you have some basic knowledge of your computer (amount of RAM number of processors, etc.) This tutorial is also intended for beginners who haven’t worked with VMware or Kali Linux before.

---

Step One:

First we need to download Kali from http://kali.org/downloads/. If you have a 64-bit capable computer (like me), then you probably will want the 64-bit version of Kali for performance reasons.
Expand the drop down menu’s to find the version you need. Select the 64-bit version ONLY if you have a 64-bit computer.

Step Two:

If you don’t have a torrent program, then click the link highlighted above and select “Save” when the download notification appears. Make sure you know where you saved it.

If you have a torrent program, then I highly recommend using the torrent option. Click on the Torrent link, it will open the torrent file in your browser. Just copy the URL of it and enter it in your torrent program.

Now wait for Kali to download, this might take several hours, depending on your internet speed.

Step Three:

When Kali has finished downloading, open VMware Player and click Create a new virtual machine.

Step Four: 

In the window that opens, select Installer disc image file (iso) and browse to the location of and select the Kali Linux ISO file that you just downloaded.

Once you have selected the file, click Next.

Step Five:

In the next step, select a name for the virtual machine. I’m going to name it Tutorial Kalifor this tutorial. You also need to select a location for it, I recommend creating a folder called “Virtual machines” in My Documents. Then click Next.

Step Six:

Next step, you need to select a maximum size for Kali. I recommend doing at least 30 GB’s as Kali tends to expand over time. After you’ve entered your desired value (no less than 20 GB) change the next option to Store virtual disk as a single file and click Next. 

Step Seven:

In the next window, we need to customize some hardware settings, so click on theCustomize Hardware… button.

Step Eight:

You will now be presented with a Hardware window. In the left pane select Memory in the left pane of the window, and slide the slider on the right side to at least 512 MB*. This is for performance. Since I have 8 GB of RAM on my computer, I’m going to put it at 2 GB’s (2000 Mb’s).*Note, you should give a virtual machine a maximum of half the RAM installed on your computer. If your computer has 4 GB of RAM, then the max you want to slide it to is 2 GB. If your computer has 8 GB, then you can go to a max of 4 GB etc.. 

Now highlight Processors in the left pane. This option really depends on your computer, if you have multiple processors, then you can select two or more. If you have a regular computer, with two or less, then I suggest leaving this number at one.

Moving on, click on Network Adapter in the left pane. On the right side, move the dot to the Bridged (top) option. Now click on the Configure Adapters button.

In the small window that pops up, uncheck all the boxes except for the one next to your regular network adapter and hit OK.

You can now click on Close at the bottom of the Hardware window and then click onFinish in the Wizard.

Step Nine: 

After you click Finish the window will close and the new virtual machine file will be added to the VM library. Now all we have to do is start Kali and install it! To do this, highlight the name of the newly created virtual machine by clicking on it, and click Play virtual machinein the right pane.

This will start Kali for the first time.

Step 10:

At the boot menu, use the arrow keys to scroll down to Graphical install and hit enter.

Step 11:

The next screen will ask you to select your preferred language, you can use the mouse to select this, then click Continue.

Step 12: 

On the next screen, select your location and hit Continue.

It’ll now ask you for your standard keymap. If you use the standard American English keyboard, then just click Continue.

Step 14:

Wait until Kali finishes detecting the hardware on your computer. During this, you might be presented with this screen:

Just hit Continue and select Do not configure the network at this time on the next screen.

Step 15:

You will now be asked to supply a hostname, which is kind of like a computer name. You can enter anything you want, or you can just leave it as kali. When you’re done, hitContinue.

Step 16:

Kali will now ask you to enter a password for the root (main) account. Make sure you can easily remember this password, if you forget it, you’ll have to reinstall Kali. Hit Continueafter you’ve enter and re-entered the password of your choice.

Step 17:

The next step will ask you for your time zone, select it and click Continue.

Step 18:

Wait until Kali detects the disk partitions. When you are presented with the next step, selectGuided – use entire disk. (this is usually the top option) then click Continue.

The installer will now confirm that you want to use this partition. Hit Continue.

One more question about the partition will appear. Select the option that says All files in one partition and hit Continue.

Step 19:

Confirm that you want to make these changes by selecting Finish partitioning and write changes to disk. Then hit Continue.

Step 20:

The last question! Confirm that you really want to make these changes by moving the dot to Yes and hitting Continue for the last time.

Kali will now start installing! Wait until it has completed, this might take upwards of 30 minutes.

Step 21:

Alright, Kali has finished installing and now you are presented with a window that asks you about a network mirror. You can just select No and hit Continue.

Step 22:

After a few minutes, the installer will ask you if you want to install GRUB boot loader. ClickYes and Continue.

Step 23:

The installation should now complete, and you’ll be shown with the following notification message:

Click Continue.

Step 24:

After it restarts, login to it with the user name root and the password that you created earlier. 

You’ve successfully installed Kali Linux in VMware.

By "Kunal Vohra", Director@H2K

Still Having Problem..!!! Connect with Admin
BBM: 7F72A48D


 Kunal Vohra Download Our Official Android App & Get Free Internet

"The Hackers Street"

For Daily Updates 

How To Hack WPA/WPA2 Wi-Fi With Kali Linux & Aircrack-ng

       

   Kali Linux can be used for many things, but it probably is best known for its “ability” to hack WPA and WPA2. There are hundreds of tools for windows that claim they can hack into WPA; don’t get them! They’re just scams. There is only one real way to hack into a WPA network, and that is with a Linux-based OS, a wireless card capable of monitor mode, and aircrack-ng. Also note that, even with these tools, Wi-Fi cracking is not for beginners. Hacking it requires basic knowledge of how WPA authentication works, and moderate familiarity with Kali Linux and its tools.

These are things that you’ll need:

• A successful install of Kali Linux (which you probably already have done). If not, follow my tutorial here: http://j.gs/3tUb
• A wireless adapter capable of injection/monitor mode, here is a list of the best:http://blackmoreops.com/recommended-usb-wireless-cards-kali-linux
• A wordlist to crack the handshake password once it has been captured
• Time and patients

If you have these then roll up your sleeves and let’s get to it.

          Important notice: Hacking into anyone’s Wi-Fi without permission is considered an illegal act or crime in most countries. We are performing this tutorial for the sake of penetration testing, and are hacking into our own test router to do so.

By reading and/or using the information below, you are agreeing to
our Disclaimer, which can be found here:http://lewiscomputerhowto.blogspot.com/disclaimor.html

---

Step One:

Start Kali Linux and login, preferably as root.

Step Two:

Plugin your injection-capable wireless adapter, (Unless your computer card supports it). If you’re using Kali in VMware, then you might have to connect the card via the icon in the device menu.

Step Three:

Disconnect from all wireless networks, open a Terminal, and type airmon-ng

This will list all of the wireless cards that support monitor (not injection) mode. If no cards are listed, try disconnecting and reconnecting the card and check that it supports monitor mode. You can check if the card supports monitor mode by typing ifconfig in another terminal, if the card is listed in ifconfig, but doesn’t show up in airmon-ng, then the card doesn’t support it.
You can see here that my card supports monitor mode and that it’s listed as wlan0.

Step Four:

Type airmon-ng start followed by the interface of your wireless card. mine is wlan0, so my command would be: airmon-ng start wlan0

The “(monitor mode enabled)” message means that the card has successfully been put into monitor mode. Note the name of the new monitor interface, mine is mon0.

Step Five:

Type airodump-ng followed by the name of the new monitor interface, which is probablymon0.

Step Six:

Airodump will now list all of the wireless networks in your area, and lots of useful information about them. Locate your network or the network that you have permission to penetration test. Once you’ve spotted your network on the ever-populating list, hit Ctrl + Con your keyboard to stop the process. Note the channel of your target network.

Step Seven:

Copy the BSSID of the target network

Now type this command:
airodump-ng –c [channel] –bssid [bssid] –w /root/Desktop/ [monitor interface]Replace [channel] with the channel of your target network. Paste the network BSSID where [bssid] is, and replace [monitor interface] with the name of your monitor-enabled interface, (mon0).

A complete command should look like this:
airodump-ng -c 10 --bssid 00:14:BF:E0:E8:D5 -w /root/Desktop/ mon0

Now press enter.

Step Eight:

Airodump with now monitor only the target network, allowing us to capture more specific information about it. What we’re really doing now is waiting for a device to connect or reconnect to the network, forcing the router to send out the four-way handshake that we need to capture in order to crack the password.
Also, four files should show up on your desktop, this is where the handshake will be saved when captured, so don’t delete them!

But we’re not really going to wait for a device to connect, no, that would take too long. We’re actually going to use another cool-tool that belongs to the aircrack suite called aireplay-ng, to speed up the process. Instead of waiting for a device to connect, we’re going to use this tool to force a device to reconnect by sending deauthentication (deauth) packets to the device, making it think that it has to reconnect with the router.

Of course, in order for this tool to work, there has to be someone else connected to the network first, so watch the airodump-ng and wait for a client to show up. It might take a long time, or it might only take a second before the first one shows. If none show up after a lengthy wait, then the network might be empty right now, or you’re to far away from the network.

You can see in this picture, that a client has appeared on our network, allowing us to start the next step.

Step Nine:

leave airodump-ng running and open a second terminal. In this terminal, type this command:
aireplay-ng –0 2 –a [router bssid] –c [client bssid] mon0The –0 is a short cut for the deauth mode and the 2 is the number of deauth packets to send.
-a indicates the access point (router)’s bssid, replace [router bssid] with the BSSID of the target network, which in my case, is 00:14:BF:E0:E8:D5.
-c indicates the clients BSSID, noted in the previous picture. Replace the [client bssid] with the BSSID of the connected client, this will be listed under “STATION.”
And of course, mon0 merely means the monitor interface, change it if yours is different.

My complete command looks like this:
aireplay-ng –0 2 –a 00:14:BF:E0:E8:D5 –c 4C:EB:42:59:DE:31 mon0

Step Ten:

Upon hitting Enter, you’ll see aireplay-ng send the packets, and within moments, you should see this message appear on the airodump-ng screen!

This means that the handshake has been captured! You can close the aireplay-ng terminal and hit Ctrl + C on the airodump-ng terminal to stop monitoring the network, but don’t close it yet just incase you need some of the information later.

Step 11:

This concludes the external part of this tutorial. From now on, the process is entirely between your computer, and those four files on your Desktop. Actually, the .cap one, that is important. Open a new Terminal, and type in this command:
aircrack-ng -a2 -b [router bssid] -w [path to wordlist] /root/Desktop/*.cap

-a is the method aircrack will use to crack the handshake, 2=WPA method.
-b stands for bssid, replace [router bssid] with the BSSID of the target router, mine is 00:14:BF:E0:E8:D5.
-w stands for wordlist, replace [path to wordlist] with the path to a wordlist that you have downloaded. I have a wordlist called “wpa.txt” in the root folder.
/root/Desktop/*.cap is the path to the .cap file containing the password, the * means wild card in Linux, and since I’m assuming that there are no other .cap files on your Desktop, this should work fine the way it is.

My complete command looks like this:
aircrack-ng –a2 –b 00:14:BF:E0:E8:D5 –w /root/wpa.txt  /root/Desktop/*.cap

Now press Enter.

Step 12:

Aircrack-ng will now launch into the process of cracking the password. However, it will only crack it if the password happens to be in the wordlist that you’ve selected. Sometimes, it’s not. If this is the case, then you can congratulate the owner on being “Impenetrable,” of course, only after you’ve tried every wordlist on the internet!

Cracking the password might take a long time depending on the size of the wordlist. Mine went very quickly.

If the phrase is in the wordlist, then aircrack-ng will show it too you like this:

The passphrase to our test-network was notsecure, and you can see here that aircrack found it!

If you see a message similar to this, then your tests have penetrated the network. Tell the owner that he needs a stronger password!

By "Kunal Vohra", Director@H2K

Still Having Problem..!!! Connect with Admin
BBM: 7F72A48D


 Kunal Vohra Download Our Official Android App & Get Free Internet

"The Hackers Street"

For Daily Updates